When woodsmoke passes through your combustor the noble metals Palladium and Platinum which are imbedded in the combustor act as a catalyst. A catalyst is a material which reduces the temperature needed for the particles of wood in the smoke to ignite causing them to burn again, which makes the stove burn more efficiently, reducing the amount of pollution your stove emits outside as well as increasing the heat output you feel in your home. A typical combustor will achieve light off at around 500 - 700 Fahrenheit and will normally operate at temperatures of 1200 - 1400 Fahrenheit
While the metals in the combustor do not burn up in the catalytic reaction, the combustor coating does degrade over time due to friction with the wood smoke. After 12,000 hours of burning you will have lost approximately 25% of your combustors catalytic function.
Use original equipment or like original equipment catalytic combustors for replacement in your wood stove. Don't settle for a cut down version that may not perform like the orginal catalytic combustor. Keep your stove burning, clean, & efficient by replacing the catalytic combustor with one properly sized and matching the orginal equipment from the factory. All our Condar catalytic combustors are made right here in the U.S.A. by the Condar Company to fit your stove exactly like it was meant to.
Condar Combustors are slightly higher priced than our other combustors for one very good reason. The Warranty. All Condar Combustors are covered 100% for the first year and at a prorated amount until the 5th year of use when correctly installed and maintained.
Year 2 - 35% rate
Year 3 - 50% rate
Year 4 - 75% rate
Year 5 - 90% rate
What that means to you is if you purchased a $100 combustor and it failed in year 3 you would pay $50 for a replacement while the other half would be covered by the warranty.
We carry replacement Catalytic Combustors for all makes and models of woodstoves. If you can not find what you are looking for please call, e-mail or fill out our Parts Request Form and we will be happy to assist you.
Combustors are measured by size and cells per square inch. Example: 6 x 3 x 2 25 means 6 inches long, 3 inches wide and 2 inches thick with 25 cells per square inch. 6 x 3 round indicates 6 inches in Diameter and 3 inches thick. Canned indicates that the combustor has a metal band around it and uncanned indicates it does not.