|
Convection and Exhaust Blower Wire Adaptor
|
|
Whitfield Convection Blower Gasket
|
|
Advantage Plus and Cascade Quick Disconnect Gasket
|
|
|
|
|
|
|
|
|
Convection and exhaust blower module Amp style, 2 wire plug in electrical connecter, 25" long. Fits older Whitfield stoves with wiring terminal blocks. Replacement for Lennox part #12128010
|
Whitfield convection blower gasket. Lennox part# 61057203
|
Whitfield 3" Quick Disconnect gasket. Fits the Advantage Plus and Cascade models. Lennox part# 61040040. May fit other models not listed.
|
|
|
|
Whitfield "O" Ring Gasket - Advantage Models
|
|
Whitfield "O" Ring Gasket
|
|
Whitfield Exhaust Motor Gasket (Small)
|
|
|
|
|
|
|
|
|
O Ring Gasket for burn grate. Fits the Advantage II-T & III Whitfield part# 61057206
|
Whitfield O Ring Gasket. Fits the Renaissance, Prodigy, Prodigy II. Lennox part#61057207
|
Exhaust Blower Gasket - For use between blower housing and blower motor. Fits all Advantage models, Legend, Explorer, Frontiersman and Quest. Whitfield part# 61020015
|
|
|
|
Whitfield Exhaust Blower Impeller - 4 3/4"
|
|
Whitfield Exhaust Motor Gasket (Large)
|
|
Combustion Blower Gasket
|
|
|
|
|
|
|
|
|
Whitfield Exhaust Blower Impeller - 4 3/4" Whitfield part# 12056108
|
Exhaust Blower Gasket - For use between blower housing and blower motor. Fits Profile 20 and 30, Optima 2 and 3, Quest Plus and the T300P models. Whitfield part# 61050041
|
Combustion blower gasket
|
|
|
|
Whitfield Exhaust Blower Housing Gasket
|
|
Low Limit F01-140 Snap Disk
|
|
Snap Disc - Low Limit Switch 120
|
|
|
|
|
|
|
|
|
Exhaust Blower Housing Gasket - For use between blower housing and exhaust duct. Whitfield part# 61057210
|
Low Limit F01-140 Snap Disk
|
120 degree low limit switch for most Pellet Stoves. 3/4" diameter. Fits most pellet stoves that take a 120 degree low limit switch, including Austroflamm (Integra), Whitfield, Avalon, Lennox and Breckwell. 30 Day Warranty.
|
|
|
|
Whitfield Auger End Plate Gasket (Neoprene)
|
|
Whitfield Fuses
|
|
Whitfield Exhaust Blower Impeller - 5.35"
|
|
|
|
|
|
|
|
|
Replacement Whitfield Auger Endplate Gasket (Neoprene). Fits all Whitfield pellet stove models. Whitfield part number 61050003
|
Whitfield fuses. 125 Volt 6 AMP. Whitfield part# 12055908
|
Whitfield Exhaust Blower Impeller - 5.35"
|
|
|
|
Whitfield 4" Quick Disconnect Gasket
|
|
Whitfield Lower Auger Bearing
|
|
Profile 30, Optima 3 and Advantage Plus Firebrick Retainer Clips
|
|
|
|
|
|
|
|
|
Whitfield 4" Quick Disconnect gasket. Fits the Optima 2 and 3, Profile 20 and 30 and Quest Plus models. Lennox part# 61050016. May fit other models not listed.
|
Replacement Lower Auger Bearing (Nylatron MB) Fits all Whitfield Pellet stove models and Traditions T300P Series. Whitfield part# 12021101
|
Whitfield Brick Retainer Clips. Set of two. Fits Profile 30, Optima 3 and Advantage Plus models. Lennox part number 11750011
|
|
|
|
Advantage II, II-T, III and Plus Door Gasket Kit
|
|
1/2" Door Rope Gasket Kit
|
|
Whitfield High Limit 250-30F
|
|
|
|
|
|
|
|
|
Complete door gasket kit including gasket and cement for Whitfield Advantage II, II-T, III and Plus.
|
Replacement 1/2" door rope gasket kit. Includes gasket cement and 8' of gasket. Fits Whitfield and Austroflamm Stoves.
|
Whitfield high limit switch (250-30F) Fits any stove requiring a 3/4" 250-30F 60T21 style snap switch. Lennox part# 12147705
|
|
|
|
Whitfield Glass Gasket Kit
|
|
Whitfield Combustion Motor Housing Gasket - Large
|
|
Quest, Quest Plus, Profile 20 and Optima 2 Brick Retainer Clips
|
|
|
|
|
|
|
|
|
Complete glass gasket kit for all Whitfield pellet stoves.
|
Replacement Combustion Motor Housing Gasket. Fits Whitfield Profile 20 and 30, Optima 2 and 3, Quest Plus and Traditions T300P Series. Whitfield part # 61050005
|
Whitfield Brick Retainer Clips. Set of two. Fits Quest, Quest Plus, Profile 20 and Optima 2 models. Lennox part number 13640028
|
|
|
|
Combustion Blower Housing Gasket Breckwell/Whitfield
|
|
Quest & Quest Plus Door Gasket Kit
|
|
Profile 20, Profile 30, Optima 2 and Traditions Door Gasket Kit
|
|
|
|
|
|
|
|
|
Combustion blower gasket for Breckwell or Whitfield Advantage series stoves.
|
Quest & Quest Plus Replacement Door Rope Gasket Kit.
|
Whitfield door rope gasket kit for Optima 2, Profile 20, Profile 30 (1 piece glass only) T300P series, TP300 series, NF2000, NF2000I and PI35 pellet stoves. Comes with gasket and glue. Aftermarket replacement for Lennox part# 26M81 Click for more info.
|
|
|
|
Whitfield WP5 Cascade Firebrick
|
|
Heat Exchange Baffle for Profile 20, Optima 2, Quest and Quest Plus
|
|
Whitfield Auger Endplate
|
|
|
|
|
|
|
|
|
Replacement Firebrick panels for the Whitfield Cascade Pellet Stove. Whitfield part# 17150025
|
Heat Exchange Baffle for Whitfield Pellet Stoves. Fit these models: Profile 20, Optima 2, Quest and Quest Plus. Whitfield part# 13650046
|
Universal replacement for outdated endplates with brass bearings. Includes Nylatron Style Bearing. Replaces Lennox part numbers 12153900, 13650072 and 13052000. For the following Whitfield Pellet Stove models:
Advantage I (WP2)
Advantage II (WP2)
Advantage II-T (WP2)
Advantage III (WP2)
Advantage Plus (WP7)
Renaissance (WW1)
Legend (WP1)
Prodigy I (WP3)
Prodigy II (WP3)
Quest (WP4
|
|
|
|
Whitfield Power Cord with Molded End, Detachable
|
|
Whitfield Exhaust Heat Sensor
|
|
Low Limit Switch 140 Ceramic
|
|
|
|
|
|
|
|
|
Replacement Whitfield Power Cord with Molded End, Detachable. 8 feet long. Fits the Advantage II-T (Serial# 75864 and up), Advantge III (Serial# 75864 and up), Optima 2 and 3, Advantage Plus,Advantage II-T Classic, Cascade, Quest, Quest Plus, Profile 20 and 30, and the T300P Series. Lennox part# 12058820
|
Whitfield Exhaust Heat Sensor. Whitfield part# 12057601
|
Whitfield low limit switch ceramic
|
|
|
|
Optima 3 and Profile 30 Door Gasket Kit (3 Piece Glass)
|
|
Whitfield Ultragrate / Unigrate Adapter Plate
|
|
Profile 20 / Optima 2 Fire-Tek Firebrick
|
|
|
|
|
|
|
|
|
Whitfield door rope gasket kit for Optima 3 and Profile 30 (3 piece glass only) pellet stoves. Comes with gasket and glue. Aftermarket replacement for Lennox part# 61051000
|
Whitfield Unigrate adapter plate for older style Advantage II, II-T & III Ultragrates.
|
Fire-Tek Firebrick. Fits Whitfield Profile 20 and Optima 2. Lennox part# 14650011
|
|
|
|
Whitfield Quest FireTek Firebrick
|
|
Profile 30 and Optima 3 Heat Deflector
|
|
Whitfield Advantage Pressure Switch
|
|
|
|
|
|
|
|
|
Whitfield Quest Firebrick. Lennox part# 13646500
|
Profile 30 and Optima 3 Heat Deflector. Whitfield part# 14750469
|
Whitfield Advantage Pressure Switch. Whitfield part # 12145903
|
|
|
|
Whitfield 6 3/8" Wide Burn Grate
|
|
Quest Plus Fire-Tek Firebrick
|
|
Whitfield Photo Eye Proof of Flame Sensor
|
|
|
|
|
|
|
|
|
Whitfield Burn Grate for Advantage II, II-T and III. Lennox part# 12150700
|
Whitfield Fire-Tek Firebrick. Fits the Quest Plus. Lennox part number 17250029
|
Whitfield Photo Eye Proof of Flame Sensor. Lennox part# 14750404
|
|
|
|
Whitfield Profile & Optima Photoeye Filter Lens
|
|
Heat Exchange Baffle for Advantage Plus
|
|
Whitfield 6" Burn Grate
|
|
|
|
|
|
|
|
|
Replacement photo eye filter for Whitfield Pellet stoves. This is the amber lens that the photo eye looks through. Fits all Profile & Optima stoves. Lennox part number 15050058.
|
Heat Exchange Baffle for Whitfield Pellet Stoves. Fits the Advantage Plus WP7 freestanding and insert models. Whitfield part # 11750031
|
Whitfield Burn Grate for Prodigy I and II, Renaissance and Waterford Erin. Lennox part# 13053500
|
|
|
