Replacement 8 RPM auger motor with fan blade for MagnuM pellet stoves. Fits the following models:

NOTE:  

1. If your current auger motor is held in place by 4 screws (each about 3" long) and has a coupler attached to the auger motor shaft then, it is highly recommended you upgrade to the latest auger system. The parts needed are MF3636 and MF3553. Failure to upgrade to the current system may cause the gears inside of the new auger motor to break or the motor itself to burn up and would not be a warranty issue.
2. For Countryside units: If your stove was made before 2010, check that your auger shaft is 1 1/2" in diameter. If it is 1 1/2" in diameter, this is the correct motor. If it has a 1" diameter, then you would need the motor # MF3539 (which is no longer available). 

Magnum Pellet Stoves:

• 7500 Furnace
• Countryside Insert (Post 2010 or with a 1 1/2" Diameter Auger)
• Countryside Pedestal (Post 2010 or with a 1 1/2" Diameter Auger)
• Countryside Queen Ann (Post 2010 or with a 1 1/2" Diameter Auger)

MagnuM part # CF26
Replaces part # MF3572
OEM MagnuM part

May fit other models, please check your owner’s manual for part number compatibility.