Splash Pool Parts

Splash Pool Parts

We have everything you need to keep your Splash Pool going, from parts like hoses, pumps, and fittings, to cleaning supply's like the skimmer kits, leaf baskets and sand filters. We also have many different covers to choose from.
  • Splash

    Splash Bungee Cord for 4ft Deep Pools (BUNGEE)

    $2.00
    These are the bungee cords that are used to tie down the winter covers for Splash pools. They go through the grommets and attach to the stainless steel ring at the bottom of the leg on the pools. These bungee cords are designed to be used with all of the...
    $2.00
  • Splash

    Stainless Steel D Ring for Splash Pools (SSRING)

    $4.86
    Stainless Steel Ring for Splash Pools. This is the stainless steel ring that connects the bearing pin in the buttress strap to the leg of the pool. Splash Pools: Alpha SuperPools Titan May fit other models of Splash Pools as well. Please check your...
    $4.86
  • Splash

    Pool Repair Kit - Blue for Splash Pools (PATKIT)

    $14.00
    Pool Repair Kit for Splash Pools.Includes two (2) circular 5 inch blue patches and one tube of glue. Fits the following Splash Pools: SuperPool Alpha Omega Titan May fit other models of Splash Pools as well. Please check your owners manual for part...
    $14.00
  • Splash

    Hose Gasket for Splash Pools (HGASKET)

    $2.50
    Hose Gasket for Splash Pools. This is the hose gasket that is used in the ends of the blue Splash hoses that come standard with the Splash family of pools. This is for a single gasket. If you wish to replace all of the hose gaskets on a standard pool...
    $2.50
  • Splash

    Bearing Pin for Splash Pools (BRNPIN)

    $6.48
    Bearing Pin for Splash Pools. This is the metal pin that goes through the buttress strap. It connects the strap to the Stainless Steel D-rings that are around the metal legs. Fits the following Splash Pools: SuperPool Alpha Titan May fit other...
    $6.48
  • Splash

    Skimmer Hold Down Hose for Splash Pools (HDHOSE)

    $15.00
    Skimmer Hold Down Hose for Splash Pools. This is the piece of black hose that attaches your skimmer body to the skimmer hold-down wall fitting midway up your skimmer. The piece is approximately 6 inches long and it is black. Fits the following Splash...
    $15.00
  • Splash

    Hose Nipple for Splash Pools (NIPPLE)

    $8.88
    1 1/2 Threaded Hose Nipple for Splash Pools. This is a hose connector nipple that has 1 1/2 MPT threads on each end. If you need to connect two blue hoses together, this is the piece that you will need. This is NOT the nipple to connect hoses to the...
    $8.88
  • Pre-99 Wall Fitting 90 Degree Elbow for Splash Pools (WALFIT)

    Splash

    Pre-99 Wall Fitting 90 Degree Elbow for Splash Pools (WALFIT)

    $29.00
    Pre-99 Wall Fitting for Splash Pools. This wall fitting is a one-piece wall fitting and 90-degree elbow that is used for the older slip-on hoses that use hose clamps to tighten the seal on the hose. These were used on Splash pools made before 1999...
    $29.00
    Quick view
  • Splash

    Skimmer Vacuum Plate for Splash Pools (VACFIT)

    $37.33
    Skimmer Vacuum Plate for Splash Pools. This adapter plate allows you to run most suction side vacuums through your skimmer. It fits directly on top of the skimmer. This piece fits all skimmers after 1999 for SuperPool, Omega and Alpha pools. Fits the...
    $37.33
    Quick view
  • Splash

    Trap Lid O-Ring for Splash Pools (35505-1437)

    $7.85
    Trap Lid O-Ring for Splash Pools. This is the the O-ring that goes inside the 5 Clear Trap Lid. This O-Ring is for the PLM-150, PRC-75 and the 21 Sand system. OEM Splash pools part. Splash part # 35505-1437
    $7.85
  • Splash

    13' x 25' Solar Cover for Splash Pools (1325SC)

    $155.00
    13' x 25' Solar Cover for Splash Pools. This 8mil thick Solar Pool Cover is for the 13 x 25 foot SuperPool. OEM Splash pools part. Splash part # 1325SC
    $155.00
    Quick view